Once the APCO Fast Dry Solvent Based Road Marking paint has dried, we recommend applying a coat of Omega Concrete Sealer Clear over the lines. This prevents the dirt and dust from the tyres from marking the lines and makes it easy to clean.
APCO Road Marking Fast Dry Water Borne Paint dries very quickly and complies with State and Federal Government Roads standards of “No tyre pick up/marking dry time”.
Drying Time (at 25C & RH 60%)* (White N14): Less than 1 min 30 seconds. (Bright Yellow Y14): Less than 3 min.
Note: Cooler temperatures, higher film thickness, low air flow conditions or higher humidity conditions will require longer drying time.
All APCO Road Marking Products are made “Ready for Use”. Slight thinning is only required to allow the paint to flow through the spray gun. Over thinning will affect the drying time and cause a lower paint film thickness. If the spray unit is too small, then a spray unit of higher spraying volume should be used.
All APCO Road Marking Paints are made in Australia and manufactured in a Certified Facility and meet APAS, NATA and ISO 9001:2015 requirements.
APCO Coatings is a fully Australian Owned Company. The name brand APCO is one of the biggest coating companies internationally and is manufactured under licence by an Australian company. This means that up to date world-wide technology is shared with our company.
The standard colour range is White and Black N61 along with Golden Yellow Y14, Blue Bell B41, Bright Blue B23, Emerald G13, Signal Red R13 and Homebush Yellow Y26. Other colours are available on request.
APCO Road Marking is available throughout Australia, simply contact our head office on 02 9832 0000 or e-mail us at firstname.lastname@example.org with your requirements.